Content on this page requires a newer version of Adobe Flash Player.

"Get Adobe Flash player"

 ميكرفون يد موديل:SM86

ميكرفون يد

   موديل : SM86


Shure SM86 Cardioid Condenser Vocal Microphone


Condenser cartridge for studio quality sound
Tailored frequency response for a clear reproduction of vocals
Rugged construction withstands the rigours of touring sound
Cardioid polar pattern minimizes unwanted background noise
Excellent choice for stage monitors and personal in-ear monitors
Built-in three-point shock mount minimizes handling noise
Two-stage pop filter reduces wind and breath noise
Break Resistant Microphone Clip (A25D),
Microphone Bag (26A13) and 5/8 inch to 3/8 inch Thread Adapter
(31A1856) included with this microphone


Transducer Type: Condenser (electret bias)
Frequency Response: 50 to 18,000 Hz
Output Impedance: 150 Ohms at 1 kHz, Recommended minimum load
 impedance: 600 Ohms
Sensitivity (at 1,000 Hz) Open Circuit Voltage: –50 dBV/Pa
(3.15 mV) (1 Pa = 94 dB SPL)
Output Clipping Level, 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
Maximum SPL (at 1,000 Hz), 1000 Ohm load (1% THD): 147 dB
Self-Noise: 23 dB typical, A-weighted
Dynamic Range (1000 Ohms): 124 dB (maximum SPL to
A-weighted noise level)
Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651)
Polarity: Positive pressure on diaphragm produces positive voltage
on pin 2 relative to pin 3 of the output connector
Power - Phantom Supply Requirement: 11 to 52 Vdc, positive
at both pins 2 and 3
Current Drain: 5.2 mA
Connector: Three–pin (XLR) Male
Case: Dark gray enamel-painted steel with matte-finished silver
colored steel grille
Dimensions: 7.2 x .95" (183 x 24mm) (Length x Diameter)
Weight: 278 grams (9.8 oz)


صنع في المكسيك

عودة إلى أنظمة صوتية SHURE

البحث في الموقع

يمكنك عزيزي الزائر البحث عن أي منتج بكل سهولة

انقر هنا لدخول صفحة البحث